Steel and Wood Garage Shelving Unit (Gray) (60"H x 36"W x 18"D) Review

Average Reviews:

(More customer reviews)versatile, can be used as work surface or as shelves. Frame was difficult to assemble without bending it.

Click Here to see more reviews about: Steel and Wood Garage Shelving Unit (Gray) (60H x 36W x 18D)

Product Description:
This Steel and Wood Garage Shelving Unit can be used as a shelf or as a work bench, perfect for getting the garage organized once and for all! The steel frame can hold up to 2000 lbs of evenly distributed weight, perfect for tools, parts, bins and more. Four particle board shelves adjust in 1" increments, offering a customized garage shelf for your home. Assembles without nuts or bolts. Galvanized steel finish is rust resistant. Made in the USA! Assembly level/degree of difficulty: Easy. Made in America

Want to read more honest consumer review about Steel and Wood Garage Shelving Unit (Gray) (60H x 36W x 18D) now ?

Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack Review

Average Reviews:

(More customer reviews)After shopping for a garage ceiling storage system, I purchased this device.I was attracted to the ability to raise and lower the platform to load and unload items.This avoids the obvious pitfalls of using a ladder to hoist large or heavy items up from the ground.

In summary, I am reasonably happy with the overall product with some exceptions mentioned below.However, I will caution potential buyers that the design of this device is unforgiving.Unless your ceiling joists are EXACTLY 48" apart (they can be 1.5" less but not more than 48"), installation will be no where near as easy as the video on the website.You may need to mount this to a rigid board first if your joists are not 48" apart.The axle is not made to be adjustable and I find this to be a major design flaw of the device.

The foundation of the system includes 3 heavy metal grates that are secured to two metal cross beams with J hooks.I had a little trouble aligning the J hooks with the holes on the metal beams.However, by far, the most trouble I had was with securing the system to the ceiling.I really did not want to mount this to a board before securing it to the ceiling for aesthetic reasons.My ceiling joists were about 49" apart (instead of 48") and this created a VERY problematic installation.You need to secure this into wood (and not just the ceiling drywall) and you cannot mount the arms of the device further than 48" apart as the axle will not be long enough.I ended up lengthening the axle by a few inches by screwing both halves of the axle together with only the first set of holes.The two halves of the axle are supposed to come together with one inside the other aligning two sets of holes on each piece.I only went as far as the first set thus making it a little longer.Then I bought some aluminum 1/2 inch metal from a hardware store and reinforced the axle by screwing it to two sides of the axle.Keep in mind that the axle is not completely load-bearing so as long as it is rigid and reinforced, the system will work fine (see my uploaded picture of the lengthened and reinforced axle).

Problems continued when I used the included hardware lag bolts to screw the arms into the ceiling joists.Using a drill, I pre-drilled the holes as instructed and used a socket wrench to screw the lag bolts to the joists.I torqued 4 of the heads off of the cheap lag bolts.Do yourself a favor and go buy some better lag bolts at a hardware store before installing this device.The included lag bolts are totally inferior. After finishing the installation, it worked as described and I loaded it with a few hundred pounds of things I had previously kept on my garage floor.I will also mention that using the included crank device to raise and lower the platform, while not overly difficult, is a good work out.

Overall, I would recommend this product IF you know your joists are no further than 48" apart (or you are comfortable mounting it to a board first) and you go buy some decent lag bolts before trying to secure it to the ceiling.

Click Here to see more reviews about: Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack

Product Description:
The RacorPro PHL-1R Pro HeavyLift Storage Rack lets you load and lift heavy items to the ceiling for storage without the need for a ladder. It helps to free up valuable floor space in your garage or storage area and allows you to store heavier items, such as furniture, lawn mowers, tires, canoes, snow throwers, and more. The heavy-duty 4-by-4-foot platform is built to last and provides 16 square feet of additional storage space in your garage or storage area.

The RacorPro PHL-1R Pro HeavyLift Storage Rack:

Frees up an additional 16 square feet of floor space.
Handles up to 250 pound items.
Securely and safely locks into place.

The heavy-duty design can handle 250 pounds. View larger.

Raising and lowering heavy items takes minimal effort, thanks to the lift's unique pulley system. View larger.Heavy-Duty Lifting Capacity for Heavier Items
The PHL-1R is both tough and durable, and it's built to handle heavier items up to 250 pounds. The heavy-duty steel support beams and 4-by-4-foot platform are made from high-quality materials that are made to handle tough loads and provide years of consistent performance. The unit is built to lower 8 feet from the ceiling, accommodating storage spaces with taller ceilings. The drill driver attachment allows you to raise and lower the platform using your own drill.
The unique pulley system makes it easy to raise and lower heavy items with minimal effort on your part. With a durable winding axle that works in conjunction with the pulleys and strong nylon cables, the PHL-1R handles the brunt of the weight so you don't have to, while raising or lowering the platform quickly and smoothly.
Safety Lock Ensures Safety and Stability
The innovative safety lock ensures that the load stays locked into place when fully raised to the ceiling. Simply use the winding crank to engage the safety lock when the platform is raised to its highest position, and use the winding crank's integrated hook to disengage the safety lock and safely lower the platform.
An Additional 16 Square Feet of Storage Space for Your Garage
The PHL-1R's tough 4-by-4-foot platform gives you an additional 16 square feet of valuable storage space in your garage or storage area. This allows you to store your lawn mower out of the way during the winter or to store your snow thrower during the summer months, clearing valuable floor space and creating tidier, more useful quarters.
The RacorPro PHL-1R HeavyLift Storage Rack measures 49.25 x 17.5 x 7.25 inches (packaged) and weighs 74 pounds (packaged). It comes in a smooth black finish and includes all necessary hardware. Additional tools required for installation include: stud finder (for drywall ceilings), adjustable or box end wrench, socket wrench, cordless drill/driver, Phillips screwdriver, pencil, and a 4-foot straightedge or chalkline.
What's in the Box
Winding crank assembly, two arm assemblies, two cable assemblies (including nylon cables), three wire grids, two wire beam supports, center spindle square end, center spindle round end, gear drive, Allen wrench, four end caps, 20 hex bolts, four Allen head screws, two hex head screws, two fender washers, eight long machine bolts, 16 washers, eight nuts, 12 "J" hooks, 12 washers, 12 nuts.

Get 38% OFF

Want to read more honest consumer review about Racor PHL-1R Pro HeavyLift 4-by-4-Foot Cable-Lifted Storage Rack now ?

SureLock Wall Mounted Ski Rack Review

Average Reviews:

(More customer reviews)I bought this to help keep my family's skis organized. This is actually something that is better suited to holding up a couple of brooms. I guess this could hold up two or so pairs of cross country skis, but certainly not downhill skis. It is way too light weight and narrow. I gave it two stars, because I think it will be useful in holding brooms.

Click Here to see more reviews about: SureLock Wall Mounted Ski Rack

Product Description:
Five unique gravity spring lock grippers "grab" skis in vinyl padded grips safely and securely and won't let go until you release with a push of the thumb. Six utility hooks hold poles, gloves, and accessories. Holds up to five pairs of skis.

Want to read more honest consumer review about SureLock Wall Mounted Ski Rack now ?

Racor PBH-1R Ceiling-Mounted Bike Lift Review

Average Reviews:

(More customer reviews)I received two of these bike lifts as gifts. I installed them to replace my old "hooks-in-the-ceiling" method of hanging bicycles over my car. I had to take care to measure the height of the bicycle (adding a few inches for the pulleys) to ensure they cleared the car. I also measured the length of the bicycle to ensure it wouldn't be in the way of people walking around the car. Finally, I measured between the handlebars and seat so the pulleys were properly spaced. But once that was done, installation was a simple matter of drilling three pilot holes per pulley in a joist and screwing them in.

Although the instructions say to tie a stop knot in the rope and thread it through the pulleys and hooks before installation, it's easier not to do that until after you've installed the pulleys. (I did tie a knot in the rope and run it through the hole before I installed the first pulley, but that that turned out not to be necessary because there's enough clearance to push the rope through afterwards.)

Finally, I installed the cleats low enough to reach but high enough so people don't have to duck under the rope.

Like some of the other reviewers, one of my ropes was frayed. (The other one was fine.) I wrote an e-mail to Racor and a vice-president responded almost immediately. I received a replacement rope two days later. Awesome!

Conclusion: These lifts work very well, are easy to install, are reasonably priced, and are backed by excellent customer service.

Click Here to see more reviews about: Racor PBH-1R Ceiling-Mounted Bike Lift

Product Description:
The RacorPro PBH-1R Ceiling-Mounted Bike Lift allows you to take advantage of unused ceiling space to store your bike. Installation takes only a matter of minutes, and with its ingenious pulley system, raising and lowering your bike couldn't be easier. The lift lets you free up precious storage space on the floor, all while keeping your bike stored away safely until you're ready to ride.

The RacorPro PBH-1R Ceiling-Mounted Bike Lift:

Installs easily in just minutes.
Employs solid-steel construction for exception durability.
Makes it simple to raise and lower your bike.
Frees up floor space in your home.

Create more floor space in your home by getting your bike off the ground. View larger.

The RacorPro PHL-1R takes only minutes to install. Easy-to-Install Pulley System Frees up Floor Space
The PBH-1R uses a pulley system that makes it easy to raise and lower bikes weighing up to 50 pounds. The system can be installed on ceilings as high as 14 feet, and the unique rope locking system ensures that the rope stays locked in place when not in use. Storing your bike off the floor not only protects your bike from damage, but it frees up valuable floor space, helping to keep your space tidy and better organized.
Installing the Racor PBH-1R is a breeze, and you can have it completed within a matter of minutes. The only tools necessary for installation are a Phillips head screwdriver, a drill with a 1/8" bit, a tape measure, and a stud finder (for ceilings with drywall). The easy-to-follow instructions will have your Ceiling-Mounted Bike Lift ready to go in just five easy steps.
Solid-Steel Construction for Durability
The PBH-1R is built to last. All of its included hardware is constructed from solid steel for maximum durability and toughness. The locking mechanism, pulleys, rope cleat, and lift mechanism offer smooth performance for years to come. The included 48-foot lift rope is also extremely durable, and it provides plenty of excess length for ceilings up to 14-feet high.
Easy Raising and Lowering with Minimal Effort
The PBH-1R makes it a breeze to raise and lower your bike from its ceiling-mounted position. The pulley system handles the brunt of the force, so it requires very little effort on your part. Simply hook the bike handlebar and seat to the included hooks and pull the lift rope to raise the bike to its ceiling-mounted storage position. With each pull, the locking mechanism locks into place to eliminate accidental drops. Store the excess rope on the included rope cleat to keep it nice and tidy.
The RacorPro PBH-1R Ceiling-Mount Bike Lift measures 10.24 x 5.12 x 3.5 inches (packaged) and weighs just 3.64 pounds (packaged). All included components feature a black finish.
What's in the Box
Two lift assemblies, two hook pulleys (one with locking mechanism), 48-foot rope, one rope cleat, 10 two-inch wood screws.

Get 50% OFF

Want to read more honest consumer review about Racor PBH-1R Ceiling-Mounted Bike Lift now ?